Jimmy Industrial

1W High power LED green color with Epi-LED J-1W-PR-

Model:1W High power LED green color with Epi-LED J-1W-PR-

Products Details
Place of Origin Shenzhen Of China
Brand Name Jimmy
Model Number J-1W-PR-
LED Brand Epi-LED
Certification: CE,EMC, LVD, ROHS
Warranty-1: 3 years for Epi-LED
Mini order 1000pcs , Accpet the sample
Delivery term EX-Work
Payment term T/T, Western Union, Paypal
Delivery time 3-7days


1, Item NO: J-1W-PR-( Epi-LED 1W green LED);
2, Input voltage: DC: 2.0-2.3V;
3, Input Voltage; 300-350mA;
4,LED chip size: Epi-LED 40mil LED chip;
5, LED sources: Epi-LED LED chip
6, LED Lumens: 65---70lm / W.
7, Wavelength: 520---525nm.
8, Color: Green color.
9, LED bracket material: cooper..
10, Connection wire: Gold wire;
11, Lighting beam angle: 140degree.
12, Operation temperature:-30C - 60C.
13, Store temperature -30C - 80C.
14, Operation temperature: Less - 60C .
15, Light failure:<3% within 3000Hrs.
16, Lifespan: 50000hours.
17, Certificated: CE and ROHS.
18, Warranty: 2-3years


4,Equivalent circuit:

4-1,Electrical/Optical Characteristics (At TA=25°C):

Parameter Symbol Conditions Min Avg Max Units
Luminous Intensity Φ IF=350mA 60 62 65 Lm
Wavelength nm IF=350mA 520 --- 525 nm
Forward Voltage VF IF=350mA 3.0   3.4 V
Color Rendering index Ra IF=350mA 75 ...... 80  
Thermal Resistance Junction
To Board
RΘJ-B IF=350mA ...... 10 ...... °C/W
50% Power Angle   IF=350mA ...... 140 ...... degree
Reverse Current IR VR=5V ...... ...... 5 μA

4-2:Absolute Maximum Rating(At TA=25°C)

Parameter Symbol Ratings Units
Power Dissipation PD 1.1 W
Continuous Forward Current IF 350 mA
Peak Forward Curren IF(Peak) 1000 mA
LED Junction Temperature TJ 125 °C
Reverse Voltage VR 5 V
Operating Temperature Range TOPR (-)30°C To +60°C  
Storage Temperature Range TSTG (-)30°C To +60°C  
Manual Soldering Temperature TSOL 350°C± 20°C For 3 Seconds  
Soldering on a heat plate TSOL 180°C± 10°C For 20Seconds  
ESD Sensitivity ESD 4000V HBM  

5,Important Notes:

1) Tolerance of measurement of luminous flux is ±10%..
2) Tolerance of measurement of Vf is ±0.1 V.
3) The product will be packaged in Anti-Static vacuum.
4) Please refer to High Power LED RELIABILITY TEST STANDARD for reliability test conditions.
5) Use alcohl-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.

6, Warning

 The LEDs are devices which are materialized by combining Blue LEDs and special phosphors. Consequently the color of the LEDs is changed a little by an operating current. Care should be taken after due consideration when using LED’s.

6--1,.Moisture Proof Package:

When moisture is absorbed into the SMT package it may vaporize and expand during soldering .There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. For this reason, the moisture proof package is used to keep Moisture to a minimum in the package.

6--2,.Storage Conditions:

Before opening the package:
The LEDs should be kept at 30℃ or less and 60%RH or less. The LEDs should be used with in a year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel) is recommended.
After opening the package:
The LEDs should be kept at 30℃ or less and 50%RH or less. The LEDs should be soldered within 168 hours (7days) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel).It is also recommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again.
If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time. Baking treatment should be performed using the following conditions.
Baking treatment : more than 48 hours at 80±5℃/ 4h~12h  (Humidity in accordance with the different environments)

6--3,.Heat Generation

Thermal design of the end product is of paramount importance. Please consider the heat generation of the LED when making the system design. The coefficient of temperature increase per input electric power is affected by the thermal resistance of the circuit board and density of LED placement on the board as well as other components.
The operating current should be decided after considering the ambient maximum temperature of LEDs.


It is recommended that ethanol alcohol be used as a solvent for cleaning the LED ’s. when using other solvents, it should be confirmed beforehand whether the solvents will dissolve the package and the resin or not. Freon solvents should not be used to clean the LEDs because of worldwide regulations.

6--5,.Static Electricity:

Static electricity or surge voltage damages the LEDs. .
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. All devices, equipments and machineries must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LED’s .When inspecting the final products in which LEDs were assembled. It is recommended to check. Whether the assembled LEDs are damaged by static electricity or not. It is easy to find Static-damaged LED’s by a light –on test or a VF test at a lower current (below 20 mA is recommended). Damaged LEDs will show some unusual characteristics such as the leak current. Remarkably increases, the forward voltage becomes lower , or the LEDs do not light at the low Current.



Application: The high power 1W LED widely used the: LED spotlight, LED Downlight, LED Tracking light, LED outoodr light, LED street light... etc... ...

Products Categories
Blog | Privacy Policy | Certificaitons | Delivery time | Warranty | Payment Term | Feedback | jleds | LED tube light
Manufacturer for MR 16 LED,GU10 LED,LED Spotlight,LED downlight,LED ceiling light,LED tube,LED flood light,LED wall washer
nfl jerseys cheap , jordans for cheap , cheap jerseys wholesale , wholesale nfl jerseys , cheap nhl jerseys , Wholesale Jordan Shoes , wholesale nhl jerseys , cheap nfl jerseys , cheap nhl jerseys , wholesale mlb jerseys